Skip to content
Serving San Jose and nearby cities Open 24 hours, 7 days a week · (302) 712-5037

Heating Repair in Mountain View, CA

The short answer

CoolVantage AC Repair fixes furnaces, heat pumps, thermostats, and airflow problems in Mountain View homes. We find the actual cause first, then explain your repair and replacement options. Bay Area Air District rules do not force you to replace working equipment.

When the furnace or heat pump quits on a cold, damp Mountain View evening, you want a clear answer about what's wrong and what it will take to fix it. CoolVantage AC Repair diagnoses and repairs gas furnaces, heat pumps, and the thermostats and ductwork that connect them for homes across Mountain View, from neighborhoods in 94040 and 94041 to homes in 94043 closer to the Bay. Our technicians come up from our San Jose base, about 19 miles away. We explain what we find in plain terms and give you your options before any work starts.

Why Mountain View Heating Systems Act Up When You Need Them

The Santa Clara Valley has a Mediterranean climate with dry summers and mild, damp winters. Mountain View sits near the Bay, so it usually stays cooler in summer than the inland and southern parts of the valley. Homes here still need dependable heat through the chilly, wet stretch of winter.

Because winters are mild, many heating systems sit unused for months. Dust settles on burners and flame sensors. Filters get forgotten. Thermostat batteries run down. Small problems go unnoticed until the first cold night of the season. That's why so many heating calls come in at once when the weather turns. A quick check in the fall can catch these issues before they leave you without heat.

Heating Problems We Repair

Most no-heat and low-heat calls come down to a handful of common causes. We test each part instead of guessing, so you don't pay for parts you didn't need.

  • Gas furnaces that click, try to light, then shut off, often caused by a dirty flame sensor or a failing igniter
  • Blower motors that hum, run nonstop, or won't start
  • Short cycling, where the system turns on and off every few minutes
  • Heat pumps that blow cool air in heating mode or ice up and don't defrost
  • Thermostats that don't respond, read the wrong temperature, or lose their settings
  • Rooms that stay cold because of leaking, crushed, or disconnected ducts
  • Banging, squealing, or rattling noises, and burning or dusty smells that don't go away after startup
  • Tripped safety switches and limit controls that shut the system down

What Happens During a Repair Visit

We start by asking what you've noticed: when the problem began, any sounds or smells, and whether it happens all the time or only sometimes. Then we check the thermostat, power, gas supply, filter, ignition sequence, airflow, and safety controls, depending on what kind of system you have.

Once we know the cause, we explain it and walk you through your choices before doing any work. Many repairs, like cleaning a flame sensor or replacing an igniter or capacitor, can be done on the same visit if we have the part on hand. If a part has to be ordered, we tell you what to expect in the meantime.

Repair or Replace? What Bay Area Rules Mean for You

Bay Area Air District appliance rules do not require you to replace working equipment. They apply only when an existing furnace or water heater fails or is replaced. If your furnace can be repaired safely and sensibly, repairing it is a valid choice.

Plan ahead if your furnace is getting older. Under Air District Rule 9-4, natural gas furnaces manufactured starting in 2029 must meet a zero-NOx emission standard. In practice, that points homeowners toward heat pumps when they replace a furnace after that date. If you're deciding between a major repair and a replacement, we can talk through how a heat pump would work in your home.

The federal 25C tax credit for qualifying heat pumps covered systems placed in service before December 31, 2025. It is not available for new installations after that date. Mountain View homeowners can still check BayREN and their local clean energy provider for current electrification incentives. Amounts change with each funding cycle, so we confirm what's actually available before we include it in a quote.

Serving Mountain View and Nearby Cities

We provide heating repair throughout Mountain View, including ZIP codes 94040, 94041, and 94043. We also serve nearby Santa Clara County communities, including Los Altos, Sunnyvale, Cupertino, Santa Clara, and Saratoga. If you live close to any of these areas and aren't sure whether we cover your street, just ask when you contact us.

More services in Mountain View

Related

What to expect

How a visit goes

  1. Clear explanations

    We show you what's wrong, tell you why it happened, and answer your questions in plain language. You shouldn't need HVAC experience to make a good decision about your own system.

  2. Options, not pressure

    If a repair will keep your equipment running well, we'll say so. If replacement makes more sense, we'll walk you through why and what your choices are, including heat pump and ductless options.

  3. Respect for your home

    We protect floors, clean up after ourselves, and leave the work area the way we found it. Before we leave, we walk you through what we did and how your system should run.

FAQ

Common questions

Don’t see your question? Call (302) 712-5037 and we’ll talk it through.

My furnace turns on but blows cold air. What's going on?

Common causes include a dirty flame sensor, a failed igniter, a gas supply problem, or an overheating safety shutoff caused by a clogged filter. Replace the filter and check that the thermostat is set to heat. If it still blows cold air, have a technician diagnose it.

What should I do if I smell gas near my furnace?

Leave the house right away and don't flip switches or use anything that could make a spark. Once you're outside, call your gas utility or 911. Schedule repairs only after the utility says the home is safe.

Do I have to replace my gas furnace because of the new Air District rules?

No. Bay Area Air District rules do not require you to replace working equipment. They only apply when a furnace fails or is replaced. The zero-NOx standard covers gas furnaces manufactured starting in 2029.

Why is my heat pump covered in frost?

Light frost in cold, damp weather is normal, and the defrost cycle should clear it. If heavy ice builds up and stays, the cause could be a defrost control problem, low refrigerant, or poor airflow. These problems should be checked before they damage the system.

Can I still get a federal tax credit for a new heat pump?

The federal 25C credit only covered qualifying heat pumps placed in service before December 31, 2025, so it doesn't apply to new installations now. Check BayREN and your local clean energy provider for current incentives. We confirm current offers before quoting them.

Which parts of Mountain View do you serve?

We serve all of Mountain View, including ZIP codes 94040, 94041, and 94043. We also cover Los Altos, Sunnyvale, Cupertino, Santa Clara, and Saratoga.

Tell Us What Your System Is Doing

Whether it's a breakdown, a system that's struggling to keep up, or a plan to move to a heat pump, reach out and describe what's going on. We'll set up a visit, find the cause, and walk you through your options.

Request Service Call (302) 712-5037
Call (302) 712-5037 Request Service