Skip to content
Serving San Jose and nearby cities Open 24 hours, 7 days a week · (302) 712-5037

Heating Repair in Morgan Hill, CA

The short answer

CoolVantage AC Repair diagnoses and repairs gas furnaces and heat pumps in Morgan Hill, about 11 miles from our San Jose base. We explain the cause and the cost before starting work. Because Bay Area rules don't force you to replace working equipment, we'll help you decide whether a repair makes sense.

When your furnace or heat pump quits on a damp winter evening in Morgan Hill, you want a clear answer about what's wrong and what it will take to fix it. CoolVantage AC Repair sends technicians from our San Jose base, about 11 miles northwest, to diagnose and repair gas furnaces, heat pumps, and the thermostats and ductwork connected to them. We explain what we find in plain terms, show you the failed part when we can, and give you options before any work starts.

Why Heating Systems in Morgan Hill Act Up

Morgan Hill sits in the southern part of the Santa Clara Valley. Summers here run noticeably hotter than in towns closer to the Bay, and winters are mild and damp. That pattern is hard on heating equipment in a specific way. A furnace may sit unused for months, then have to run on the first chilly night of fall. Dust settles on burners and flame sensors, and igniters and control boards age quietly, so several problems can show up at once.

Heat pumps face a different challenge. The same outdoor unit handles summer cooling, so it can log heavy run time in the hot months before it ever switches to heat. Worn capacitors, contactors, and reversing valves often reveal themselves when the system changes modes in the fall.

  • Furnace blower runs, but the air coming out stays cool
  • Burners light, then shut off after a few seconds
  • Repeated clicking with no ignition
  • Heat pump blowing cool air in heat mode, or an outdoor unit that stays iced over
  • Some rooms much colder than others
  • Thermostat that doesn't respond or keeps losing its settings

What a Heating Repair Visit Looks Like

Our technician starts by asking what you've noticed and when it happens. Then they check the system in order: thermostat and power, filter and airflow, ignition and flame safety controls, and electrical parts like capacitors and relays. On furnaces, that includes gas pressure. On heat pumps, it includes refrigerant-side performance and defrost operation. On gas furnaces, we also inspect the venting and the heat exchanger area, because a cracked heat exchanger or blocked flue is a safety issue, not just a comfort problem.

Once we know the cause, we explain it, describe the repair, and give you the cost before starting. If a part has to be ordered, we'll tell you up front. Where it's safe to do so, we'll get the system running in a limited way while you wait for the part.

Repair or Replace? What Bay Area Rules Mean for You

Bay Area Air District appliance rules don't require you to replace a furnace that still works. They apply only when equipment fails or is replaced. If your furnace can be repaired safely and at a reasonable cost, repairing it is a legitimate choice.

Looking ahead, natural gas furnaces manufactured from 2029 on must meet a zero-NOx emission standard. In practice, that steers replacements after that date toward heat pumps. If your furnace is older and needs a major repair, keep that timeline in mind. We'll give you an honest comparison of the repair cost against the age and condition of your equipment, and the decision is yours.

If you're considering a heat pump, note that the federal 25C tax credit only covered systems placed in service before December 31, 2025. It isn't available for new installations now. BayREN and your local clean energy provider may offer incentives. Those change with each funding cycle, so we confirm what's current before including it in a quote.

Quick Checks Before You Call

A few simple checks may save you a visit, or at least help us diagnose the problem faster.

  • Make sure the thermostat is set to Heat and set above room temperature. If it uses batteries, put in fresh ones.
  • Check the breaker for the furnace or air handler, and the service switch near the unit.
  • Replace a dirty filter. A clogged one can trip safety limits and shut the burners off.
  • On a heat pump, clear leaves and debris from around the outdoor unit.
  • If you smell gas, leave the house and call your gas utility from outside before doing anything else.

Serving Morgan Hill and Nearby Communities

We repair heating systems throughout Morgan Hill and the rest of Santa Clara County. We also serve Los Gatos, Campbell, Monte Sereno, Saratoga, and Scotts Valley. When you contact us, tell us what type of system you have, what it's doing, and any error codes or blinking lights you see on the unit. That helps our technician arrive with the right parts.

More services in Morgan Hill

Related

What to expect

How a visit goes

  1. Clear explanations

    We show you what's wrong, tell you why it happened, and answer your questions in plain language. You shouldn't need HVAC experience to make a good decision about your own system.

  2. Options, not pressure

    If a repair will keep your equipment running well, we'll say so. If replacement makes more sense, we'll walk you through why and what your choices are, including heat pump and ductless options.

  3. Respect for your home

    We protect floors, clean up after ourselves, and leave the work area the way we found it. Before we leave, we walk you through what we did and how your system should run.

FAQ

Common questions

Don’t see your question? Call (302) 712-5037 and we’ll talk it through.

How soon can you get to my home in Morgan Hill?

We schedule visits based on current availability. Morgan Hill is about 11 miles from our San Jose base. If you have no heat and someone in the home is elderly, very young, or unwell, let us know when you call so we can take that into account.

Do new Air District rules mean I have to replace my gas furnace?

No. Bay Area Air District rules don't require replacing working equipment. They apply only when a furnace fails or is replaced. Furnaces manufactured from 2029 must meet a zero-NOx standard, which matters mainly when you eventually replace yours.

My heat pump's outdoor unit has frost on it. Is it broken?

Light frost in cold, damp weather is normal. The unit should clear it during periodic defrost cycles. If thick ice builds up and doesn't melt off, or the system blows cool air for long stretches, it needs a technician to check it.

Why does my furnace smell like burning when I first turn it on?

Dust settles on the burners and heat exchanger during the long dry season, and it burns off on the first runs of fall. That smell should fade quickly. If it persists, smells electrical, or comes with tripped breakers, turn the system off and call us.

Can I still get a federal tax credit for a new heat pump?

Not for new installations. The federal 25C credit covered qualifying heat pumps placed in service before December 31, 2025. You can check BayREN and your local clean energy provider for current incentives, and we'll confirm what's available before quoting it.

What information should I have ready when I call?

Have the type of system (gas furnace or heat pump), the brand and model number if you can find them, a description of what it's doing, and any error codes or blinking lights. Also mention any recent changes, such as a new thermostat or a power outage.

Tell Us What Your System Is Doing

Whether it's a breakdown, a system that's struggling to keep up, or a plan to move to a heat pump, reach out and describe what's going on. We'll set up a visit, find the cause, and walk you through your options.

Request Service Call (302) 712-5037
Call (302) 712-5037 Request Service